Molevion Kreatos CG 2 Fully Synthetic hBN Grease – PFAS-Free, NLGI 2, -40°C to +200°C, Non-Melting – for Bearings, Gears, Shafts & Splines

Kreatos CG 2 is a premium, fully synthetic multi-purpose grease fortified with a high percentage of lubricant-grade hexagonal boron nitride (hBN). It is built on a synthetic PAO base with an inorganic, non-melting thickener, for long-term lubrication of bearings, gears, shafts and splines across -40°C to +200°C.

hBN is one of the cleanest solid lubricants available: near-white, chemically stable and functionally similar to PTFE, but effective at considerably higher temperatures. It forms a reinforcing film that supports load-bearing contact zones and improves sliding feel – with no PTFE or other fluorinated additives.

Key benefits

• hBN solid-lubricant film – low-friction sliding and extra load support where the oil film is under pressure.
• Non-melting, no drop point – inorganic thickener stays put in hot bearings and gears up to +200°C.
• Long service life – fully synthetic PAO base for extended relubrication intervals.
• Exceptionally water repellent – holds its film where moisture is a risk.
• Clean, near-white grease – suited to visible assemblies with minimal staining.
• PFAS-free – fluoropolymer-free solid lubrication.

Applications

• Ball and plain bearings
• Gears, shafts and splines
• Robotics joints and electromechanical assemblies
• 3D printer motion components
• RC mechanisms and precision hobby engineering
• Long-term lubrication duties at temperatures up to 200°C

Apply sparingly to clean surfaces, removing old lubricant or contamination before re-lubrication.

Typical characteristics

• Base fluid: synthetic PAO
• Thickener: inorganic
• Solid lubricant: hBN (hexagonal boron nitride)
• NLGI grade: 2
• Unworked penetration: 265–295
• Drop point: none (non-melting)
• Operating temperature: -40°C to +200°C
• Colour: near white
• Water repellency: excellent
• Shelf life: 5 years from manufacture (sealed, stored as directed)
• Sizes: 20 g, 50 g, 100 g, 500 g

Not intended for brake or friction-drive surfaces. Not NSF H1 registered and not certified for direct food contact. Typical values are a guide only – confirm suitability for your application. Technical and Safety Data Sheets available on request.